Where does Enerya Antalya distribute natural gas?

According to the GAZBİR list, Enerya Antalya Gaz Dağıtım A.Ş. serves Antalya.

Does GazPlan calculate with Enerya Antalya rules?

Not yet: the specification has not been read. For this company the app uses the common profile, based on TS 7363 general rules, and warns that the rules have not been verified. The rules will be updated when the specification is uploaded.

Which limits are used to size pipes in the Enerya Antalya area?

The common profile in GazPlan allows 1 mbar loss from the service box to the meter and 0.8 mbar from the meter to the appliance, with a velocity limit of 6 m/s at low pressure. These values have not been verified for this company; the company's current specification is what counts for a project.

How many days does project approval take in the Enerya Antalya area?

We have no source for a company-specific time, so we do not quote a number of days. It depends on how many applications are in the queue, whether the project is complete the first time and how many corrections are needed. For current information, see enerya.com.tr.

Enerya Antalya natural gas project approval and drawing – Antalya, Türkiye

A quick note for firms preparing projects in the Enerya Antalya area: Enerya Antalya Gaz Dağıtım A.Ş. serves Antalya and belongs to the Enerya group. How its specification is handled in GazPlan, the calculation limits and the approval steps are set out below.

Rules: common values (not verified)

Specification status

Specification status: not read. Calculations for Enerya Antalya use a common profile, based on TS 7363 general rules, i.e. the limits that the specifications we have read (İGDAŞ, Samgaz, Kırgaz) have in common. The rules and this page will be updated when the company's specification is uploaded.

Calculation limits GazPlan uses for Enerya Antalya projects

Service box → meter loss limit	1 mbar
Meter → appliance loss limit	0.8 mbar
Velocity limit (low pressure)	6 m/s
Friction loss, steel	formula at all flows (23.2·R·Q^1.82/D^4.82, R = 0.6)
Efficiency in appliance flow	90% at 70 kW and above
Isometric angle	30°

Profile source: values common to the İGDAŞ 2017, Samgaz 2019 and Kırgaz specifications (limits 1.0 / 0.8 / 1.8 mbar, velocity 6 m/s, ζ table); TS 7363. The value in the company's current specification is what counts for a project.

Are there other distribution companies in Antalya?

Antalya: no other distribution company operates here (GAZBİR list).

The Enerya group

Other companies in the same group: Enerya Aksaray Gaz Dağıtım A.Ş., Enerya Aydın Gaz Dağıtım A.Ş., Enerya Denizli Gaz Dağıtım A.Ş., Enerya Ereğli Gaz Dağıtım A.Ş., Enerya Erzincan Gaz Dağıtım A.Ş., Enerya Kapadokya Gaz Dağıtım A.Ş., Enerya Karaman Gaz Dağıtım A.Ş., Enerya Konya Gaz Dağıtım A.Ş.

Enerya Antalya project application, step by step

Survey: take measurements, list the appliances and note the flue and vent situation (a first survey can be done from photos).
Project: choose Antalya as the province in GazPlan; pipe sizes and pressure loss are worked out with the common profile.
Review: check the calculation sheet, isometric drawing and title block against the layout the company asks for.
Submission: upload the file to the channel the company accepts, signed in the required way.
On site: installation, testing and gas opening according to the approved project.

Confirm the application channel, the document list and the current specification on the company website (enerya.com.tr). This page does not give processing times or application addresses; company-specific details are added only when they can be verified.

Related guides and calculators

If you have the current version of the Enerya Antalya specification, please send it to [email protected]; we will review it and, where it fits, update the rules in the app. Open the app

Company and province data: GAZBİR distribution company list. For information only; the distribution company's current specification and procedure apply to projects.