Which provinces does Aksa MKP Susurluk serve?

According to the GAZBİR list, Aksa MKP Susurluk Doğalgaz Dağıtım A.Ş. serves Bursa and Balıkesir. Going by the company name, the area is Balıkesir / Susurluk; confirm the boundaries with the company. Other distribution companies also operate in Bursa and Balıkesir, so check the district of the address.

Is the Aksa MKP Susurluk specification available in GazPlan?

Aksa's shared rules document (2019 Rev.01) has been read and its installation rules are built into the app. Because the document leaves the calculation values to TS 7363:2018, the limits use the common profile, based on TS 7363 general rules, and the app warns that the rules have not been verified.

What pressure loss limits apply to Aksa MKP Susurluk projects?

The common profile in GazPlan allows 1 mbar loss from the service box to the meter and 0.8 mbar from the meter to the appliance, with a velocity limit of 6 m/s at low pressure. These values have not been verified for this company; the company's current specification is what counts for a project.

How long does Aksa MKP Susurluk project approval take?

We have no source for a company-specific time, so we do not quote a number of days. It depends on how many applications are in the queue, whether the project is complete the first time and how many corrections are needed. For current information, see aksadogalgaz.com.tr.

Aksa MKP Susurluk natural gas project approval and drawing – Bursa, Türkiye

A quick note for firms preparing projects in the Aksa MKP Susurluk area: Aksa MKP Susurluk Doğalgaz Dağıtım A.Ş. serves 2 provinces (Bursa and Balıkesir) and belongs to the Aksa group. How its specification is handled in GazPlan, the calculation limits and the approval steps are set out below. Going by the company name, its service area is Balıkesir / Susurluk; confirm the district boundaries with the company.

Rules: TS 7363 common

Specification status

Aksa's Indoor Installation Design and Application Rules (2019 Rev.01) have been read. The document leaves the calculation values to the TS 7363:2018 standard, and since the text of the standard has not been read, the calculation limits use a common profile, based on TS 7363 general rules. This page and the values in the app will be updated when the standard is uploaded.

Rules from the Aksa document built into the app

DN15 is not used in welded installations inside a flat (art. 2.10); automatic sizing picks DN20 or larger.
No tee branch is made at the meter outlet just before the pipe enters the flat (art. 2.9).
Inlet valves are of the lockable type and unused outlets are sealed and blanked (art. 2.7); the main shut-off valve and the meter valve carry an OPEN-CLOSED sign (art. 2.5).
Type C or condensing appliances up to 50 kW may be placed outdoors in a ventilated cabinet (art. 2.15).

Calculation limits GazPlan uses for Aksa MKP Susurluk projects

Service box → meter loss limit	1 mbar
Meter → appliance loss limit	0.8 mbar
Velocity limit (low pressure)	6 m/s
Friction loss, steel	formula at all flows (23.2·R·Q^1.82/D^4.82, R = 0.6)
Efficiency in appliance flow	90% at 70 kW and above
Isometric angle	30°

Profile source: Aksa Indoor Installation Design and Application Rules, 2019 Rev.01 (scanned, OCR) + TS 7363:2018. The value in the company's current specification is what counts for a project.

Are there other distribution companies in these provinces?

Bursa: other companies serving this province: Aksa Bursa Şehiriçi Doğal Gaz Dağıtım Ticaret ve Taah A.Ş., Aksa Gemlik Doğalgaz Dağıtım A.Ş., Marmara Yalova Doğal Gaz Dağıtım A.Ş., Tgaz İnegöl Doğal Gaz Dağıtım A.Ş. Pick the right company by the district of the address.
Balıkesir: other distribution companies in the same province: Aksa Balıkesir Doğalgaz Dağıtım A.Ş., Aksa Bandırma Doğalgaz Dağıtım A.Ş. Pick the right company by the district of the address.

The Aksa group

The GAZBİR list shows 23 distribution companies in the Aksa group, this one included; all of them are in the distribution companies and provinces table. The same shared rules document applies to every Aksa company.

Aksa MKP Susurluk project application, step by step

Survey: take measurements, list the appliances and note the flue and vent situation (a first survey can be done from photos).
Project: choose Balıkesir as the province in GazPlan and type Susurluk as the district; pipe sizes and pressure loss are worked out with the common profile.
Review: check the calculation sheet, isometric drawing and title block against the layout the company asks for.
Submission: upload the file to the channel the company accepts, signed in the required way.
On site: installation, testing and gas opening according to the approved project.

Confirm the application channel, the document list and the current specification on the company website (aksadogalgaz.com.tr). This page does not give processing times or application addresses; company-specific details are added only when they can be verified.

Related guides and calculators

If you have the current version of the Aksa MKP Susurluk specification, please send it to [email protected]; we will review it and, where it fits, update the rules in the app. Open the app

Company and province data: GAZBİR distribution company list. For information only; the distribution company's current specification and procedure apply to projects.