Which provinces does Agdaş Adapazarı serve?

According to the GAZBİR list, Agdaş Adapazarı Gaz Dağıtım A.Ş. serves Sakarya. Other distribution companies also operate in Sakarya, so check the district of the address.

Is the Agdaş Adapazarı specification available in GazPlan?

Not yet: the specification has not been read. For this company the app uses the common profile, based on TS 7363 general rules, and warns that the rules have not been verified. The rules will be updated when the specification is uploaded.

What pressure loss limits apply to Agdaş Adapazarı projects?

The common profile in GazPlan allows 1 mbar loss from the service box to the meter and 0.8 mbar from the meter to the appliance, with a velocity limit of 6 m/s at low pressure. These values have not been verified for this company; the company's current specification is what counts for a project.

How long does Agdaş Adapazarı project approval take?

We have no source for a company-specific time, so we do not quote a number of days. It depends on how many applications are in the queue, whether the project is complete the first time and how many corrections are needed. For current information, ask the company or your authorised installation firm.

Agdaş Adapazarı natural gas project approval and drawing – Sakarya, Türkiye

A quick note for firms preparing projects in the Agdaş Adapazarı area: Agdaş Adapazarı Gaz Dağıtım A.Ş. serves Sakarya. How its specification is handled in GazPlan, the calculation limits and the approval steps are set out below.

Rules: common values (not verified)

Specification status

Specification status: not read. Calculations for Agdaş Adapazarı use a common profile, based on TS 7363 general rules, i.e. the limits that the specifications we have read (İGDAŞ, Samgaz, Kırgaz) have in common. The rules and this page will be updated when the company's specification is uploaded.

Calculation limits GazPlan uses for Agdaş Adapazarı projects

Service box → meter loss limit	1 mbar
Meter → appliance loss limit	0.8 mbar
Velocity limit (low pressure)	6 m/s
Friction loss, steel	formula at all flows (23.2·R·Q^1.82/D^4.82, R = 0.6)
Efficiency in appliance flow	90% at 70 kW and above
Isometric angle	30°

Profile source: values common to the İGDAŞ 2017, Samgaz 2019 and Kırgaz specifications (limits 1.0 / 0.8 / 1.8 mbar, velocity 6 m/s, ζ table); TS 7363. The value in the company's current specification is what counts for a project.

Are there other distribution companies in Sakarya?

Sakarya: other companies serving this province: Akmercan Gepa Doğal Gaz Dağıtım Sanayi ve Ticaret A.Ş. Pick the right company by the district of the address.

Agdaş Adapazarı project application, step by step

Survey: take measurements, list the appliances and note the flue and vent situation (a first survey can be done from photos).
Project: choose Sakarya as the province in GazPlan; pipe sizes and pressure loss are worked out with the common profile.
Review: check the calculation sheet, isometric drawing and title block against the layout the company asks for.
Submission: upload the file to the channel the company accepts, signed in the required way.
On site: installation, testing and gas opening according to the approved project.

Ask the company, or the authorised firm you work with, about the application channel and the current document list. This page does not give processing times or application addresses; company-specific details are added only when they can be verified.

Related guides and calculators

If you have the current version of the Agdaş Adapazarı specification, please send it to [email protected]; we will review it and, where it fits, update the rules in the app. Open the app

Company and province data: GAZBİR distribution company list. For information only; the distribution company's current specification and procedure apply to projects.